199 - Grande Punto   1.2 8v   CONTROL PANEL - R+R   5560B10   

Detail     Detail
Removing ( Refitting )

- Disconnect the negative battery terminal or, for cars equipped with the Start&Stop device, the "negative dummy pole".

 

 

Description

 

Connector

 

-

 

BATTERY

 

   See A001 BATTERY

 

-

 

TERMINAL BOX

 

   See A005 Contact board

   Op. 7040A23 INSTRUMENT PANEL FRAME IN DASHBOARD - R.R.


1. Unscrew the bolts.

2. Move control panel (2a) slightly by undoing retainers (2b).

3. Disconnect the electrical connection.

 

 

Description

  

Connector
 

3

  

INSTRUMENT PANEL

  

   See E050 INSTRUMENT PANEL

4. Keep the control panel.
Refitting ( Removing )

- Check that the control panel is not damaged.

- Connect the electrical connection.

- Position the control panel and do up the retainers.

- Tighten the screws.

   Op. 7040A23 INSTRUMENT PANEL FRAME IN DASHBOARD - R.R.

- Connect the negative battery terminal or the "negative dummy pole".

Several of the CAN nodes - including the instrument panel - are programmed with default settings that the customer will find when they acquire the vehicle. If the panel is replaced, the Parts Dept. will send a "pristine" component.Once fitted, the data memorised in the Body Computer must be transferred to it by carrying out the PROXY ALIGNMENT procedure using the Examiner.

- Check that the control panel instruments are working.